9.5mm stainless steel welded mesh is a welded wire product specified by its opening size, wire diameter, stainless steel grade, panel or roll dimensions, and finish. Before requesting a quote, confirm whether “9.5mm” means the clear opening or another dimension, because the term alone does not define a complete specification. If it means a square clear opening, 9.5mm is approximately 0.374 inches. At Shunqiang Wire Mesh, we recommend sending a written specification and intended application so we can assess the appropriate product configuration.
If you want to learn more, please visit our website.
This guide is for procurement teams, fabricators, distributors, and project engineers sourcing stainless steel welded wire mesh. It is useful when you have a nominal 9.5mm opening in mind but still need to define the product for comparison or production. It also helps buyers prepare the information a manufacturer needs to evaluate feasibility and quote accurately. Final suitability depends on the working environment, loading, installation, and applicable project requirements.
Welded mesh is made by arranging wires in intersecting directions and joining them at the crossing points. In a square mesh, the aperture is the clear distance between adjacent wires, while the pitch is the center-to-center distance from one wire to the next. These dimensions are related but are not interchangeable. A mesh described only as “9.5mm” can therefore be interpreted differently by a buyer and a supplier.
For a square mesh, pitch is approximately the clear opening plus the wire diameter. For example, a 9.5mm clear opening with 1.0mm wire gives a nominal pitch of 10.5mm. In an idealized square pattern, that combination has a geometric open-area proportion of about 81.9%, calculated as (9.5 ÷ 10.5)². This is a theoretical illustration, not a guaranteed production value; actual dimensions and open area depend on manufacturing tolerances and the supplied configuration.
Wire diameter affects stiffness, weight, open area, and the amount of material used. Increasing the wire diameter while retaining the same clear opening increases pitch and reduces the proportion of open space. A smaller wire may provide more open area but may not suit the mechanical demands of the application. Ask the supplier to confirm both opening and wire diameter on the quotation and product drawing.
Grade selection should reflect exposure conditions, cleaning chemicals, temperature, and the expected service environment. Commonly requested stainless steel options include 304 and 316, but neither grade should be treated as suitable for every installation. Buyers evaluating coastal, chemical, or otherwise corrosive environments should provide details of the exposure and request a grade recommendation for technical review. Confirm the exact grade and any material documentation required before placing an order.
Goto Shunqiang Wire Mesh to know more.
Depending on wire diameter, mesh dimensions, and manufacturing capability, welded mesh may be supplied as panels or rolls. Panels may be easier to handle where fixed dimensions and relatively rigid sections are required, while rolls can suit applications that need longer continuous lengths. Availability varies by specification, so confirm the supply form rather than assuming it. Also describe any required edge treatment, surface condition, or fabrication, such as cut-to-size panels.
A 9.5mm opening may be considered where a project needs a defined aperture and welded intersections, but opening size alone does not determine whether the mesh will perform as required. Screening, guarding, partitions, filtration-related components, and general fabrication can have different expectations for strength, visibility, flow, and cleanability. Confirm the function and the size of any material or object that must be retained or excluded. For applications involving structural loads, machinery safety, food contact, or regulated environments, obtain a project-specific engineering or compliance review.
| Specification item | What to state |
|---|---|
| Opening | 9.5mm clear opening, or identify the intended measurement convention |
| Wire diameter | Required diameter, or ask for available options |
| Material | Required stainless steel grade and documentation needs |
| Supply form | Panel or roll, with width, length, and quantity |
| Application | Environment, function, and any relevant handling or performance needs |
| Commercial details | Destination, requested delivery schedule, packing, and order quantity |
The price of 9.5mm stainless steel welded mesh depends on the confirmed grade, wire diameter, dimensions, order quantity, fabrication, packing, and delivery destination. A request that gives only the opening size may require clarification before a comparable quotation can be prepared. Minimum order quantities and lead times can vary with the specification, production schedule, and whether the order is standard or customized. Ask suppliers to state these commercial terms in writing rather than relying on general estimates.
When comparing offers, check that each supplier is quoting the same opening convention, wire diameter, grade, dimensions, and supply form. A lower unit price may reflect a different material specification, tolerance, or packing arrangement, so compare the technical description alongside the total cost. If you have a target budget or delivery date, share it early to help the supplier identify workable options. Confirm freight, packaging, and any applicable trade terms before issuing a purchase order.
Shunqiang Wire Mesh works with buyers to clarify welded mesh requirements and assess product configurations for quotation. Share your application, opening definition, wire diameter, stainless steel grade, dimensions, and quantity so our team can review the request. If some details are not yet fixed, identify them as open questions rather than assuming they are included in the 9.5mm designation. We can then discuss available options, customization requirements, packing, and delivery expectations based on the order details.
To source 9.5mm stainless steel welded mesh reliably, first confirm that 9.5mm means the required clear opening, then specify wire diameter, stainless steel grade, dimensions, supply form, and application conditions. These details make supplier quotations easier to compare and reduce the risk of ordering a mesh that does not match the project. For your next step, prepare an RFQ with the information in this guide and request written confirmation of the final specification. Contact Shunqiang Wire Mesh with your requirements to discuss a suitable configuration and receive a project-specific quotation.
Want more information on 9.5mm stainless steel welded mesh? Feel free to contact us.