3/4 inch SS201 welded wire mesh is a stainless steel grid made by welding wires at regular intervals, with a nominal opening of 3/4 inch—equivalent to 19.05 mm. It may suit applications that need a defined open grid and a stainless steel material option, provided SS201’s corrosion resistance matches the service environment. The opening size alone does not define the product: buyers also need to specify wire diameter, panel or roll dimensions, tolerances, and finish. I recommend confirming these details against the intended use before requesting a quotation.
Please visit our website for more information on this topic.
This guide is for procurement teams, fabricators, distributors, and engineers evaluating 3/4 inch SS201 welded wire mesh for a project or resale program. It is useful when you have a target opening but still need to define the remaining product details. It can also help you compare supplier quotations on an equivalent basis. I use “SS201” to refer to the requested stainless steel grade, while noting that grade verification should be addressed in the purchasing documents.
The nominal 3/4 inch measurement converts to 19.05 mm. In a mesh specification, however, buyers and suppliers may describe spacing differently: some refer to the clear distance between adjacent wires, while others use center-to-center spacing. These measurements are not interchangeable because wire diameter affects the clear opening. State the measurement basis on your inquiry and request confirmation on the supplier’s drawing or product specification.
Welded wire mesh consists of intersecting wires joined at their crossings to form a grid. The opening pattern, wire diameter, and overall dimensions determine the product configuration, while the welds connect the longitudinal and transverse wires. A 3/4 inch opening can therefore be supplied in different constructions rather than as one universal specification. For accurate comparison, request the full construction details instead of relying on the opening designation alone.
SS201 is a stainless steel grade that buyers may consider where a stainless steel mesh is required and the operating environment is compatible with the material. It should not be assumed to perform identically to every other stainless steel grade, particularly in demanding corrosive conditions. Exposure to salt, chemicals, persistent moisture, or aggressive cleaning agents may change the suitability assessment. If corrosion resistance is a critical requirement, share the exposure conditions with your supplier and have the material choice reviewed before purchase.
A useful inquiry identifies the mesh opening, how that opening is measured, wire diameter, material grade, and product format. It should also state the required width and length for rolls, or the length and width for panels. For example, a buyer could request a 1.2 mm wire diameter as a project-specific requirement; this is an illustration, not a universal standard for 3/4 inch SS201 mesh. Add any requirements for dimensional tolerance, edge condition, surface finish, labeling, and packaging where they affect installation or handling.
Shunqiang Wire Mesh Product Page
| Specification item | What to confirm | Why it matters |
|---|---|---|
| Opening | 19.05 mm nominal; clear opening or center-to-center | Ensures the mesh fits the intended design or screening requirement |
| Wire diameter | Required diameter and acceptable tolerance | Affects construction, handling, and compatibility with the application |
| Material | SS201 grade and any documentation needed | Aligns the purchase with the specified material and service environment |
| Format and size | Roll or panel, width, length, and edge requirements | Supports transport, cutting, and installation planning |
Start with the function the mesh must perform rather than assuming that a 3/4 inch opening is suitable for every use. The opening may be relevant to separation, guarding, support, or general fabrication, but actual suitability depends on the object being retained, the load or contact conditions, and the installation design. Consider whether the mesh will be indoors or outdoors and whether it will encounter water, cleaning chemicals, or other corrosive exposure. Where safety or structural performance is involved, have the complete assembly reviewed by a qualified project professional.
The price of a mesh order can depend on material, wire diameter, opening, dimensions, order quantity, product format, and any special packing or fabrication requirements. Minimum order quantities and production lead times can vary with the requested configuration and the supplier’s current production schedule. I recommend asking for these terms alongside the technical quotation, rather than treating them as fixed properties of 3/4 inch SS201 mesh. If delivery timing is important, provide the required arrival date and destination early so the supplier can confirm feasibility.
Choose a supplier that can clearly restate your requested specification and identify any points that need confirmation. Ask how the supplier will document material grade, dimensions, and product format, and whether a drawing or written specification can be reviewed before production. Confirm packaging, marking, inspection expectations, MOQ, lead time, payment terms, and shipping arrangements. A clear written quotation reduces the risk of comparing different constructions under the same product name.
At Shunqiang Wire Mesh, we can review your requested 3/4 inch SS201 welded wire mesh details and help clarify the information needed for a quotation. Send us the opening measurement basis, wire diameter, material requirement, roll or panel dimensions, quantity, destination, and intended application. We can then confirm which configuration and commercial terms are available for your request, subject to specification and production review. If you have a drawing or purchasing specification, include it so we can identify questions before order confirmation.
3/4 inch SS201 welded wire mesh has a nominal opening of 19.05 mm, but that figure alone is not enough to determine whether a product meets your requirements. Confirm how the opening is measured, then define wire diameter, material, product dimensions, tolerances, finish, and packaging. Evaluate SS201 against the actual conditions of use, especially where moisture or chemical exposure is involved. The next step is to send a complete specification and application summary to Shunqiang Wire Mesh for a configuration and quotation review.
Contact us to discuss your requirements of 3/4 inch ss201 welded wire mesh. Our experienced sales team can help you identify the options that best suit your needs.